PET film, also called DTF,direct transfer film, which is a new technology for T-shirt heat transfer-digital offset heat transfer
Size: 50cm, 60cm, 120cm x 100m/roll
One-sided matte finish
Smooth and clean surface
75μm /100μm
Conventional: 60cmx100m/roll
Special rules: width 60cm, the number of meters can be customized
Applicable ink: pigment ink
The surface is smooth and clean
Strong ink absorption capacity, thick ink absorption layer.
The color of the pattern is realistic and complete, no halo.
Excellent physical and mechanical properties
Low shrinkage, high temperature resistance,
Small thickness tolerance, good matte, low heat shrinkage, good release.
Use process:
Double-head printing: after finish color printing, it is recommended that the white ink circulation to ensure the smoothness of the ink.
Pattern directly digital printing on the film-sprinkle hot melt powder-shake powder-dry melt powder-heat pressing.
Print suggestions:
Pressing conditions: 150-170℃, time 8-15 seconds
Tear off method: hot peel; cold peel
Storage environment:
Relative humidity 35-65%, temperature 10-30°C, sealed indoor storage, avoid direct sunlight, shelf life 1 year.
Precautions for washing:
We recommend washing the transferred T-shirts separately with ordinary detergent and cold water.
Do not mix with other clothes at the same time.
Do not dry clean or bleach.
Dry them immediately after washing. Or use a dryer to dry.
After washing, if the image shows signs of shedding, you can cover the image with greaseproof paper and iron it again. Do not iron the transfer part directly with an iron.
content is empty!