DTF Hot Melt Adhesive Powder for Direct-to-Film Inkjet Digital Printer

Classification

0# super fine powder. for best hand feeling. but not good for fastness.suggest for someone like DTG.
1# fine powder. for good hand feeling .good transform and good fastness. suggest for good requirement T-shirt.
2# normal powder. for normal hand feeling. normal transform and good fastness. suggest for normal T-shirt.
3# Coarse powder. for best fastness. normal hand feel. suggest for Brand LOGO.Autumn and winter clothing
4#……waiting…
5# Jeans powder. for best fastness for jeans and Washing label，hard hand feeling.
6# lower temperature powder. for avoid the proyester second times sublimation. heat press at about 110 degree

Advantages of hot-melt powder:

1. Fast bonding speed, suitable for automatic high-speed operation; 2. Solvent- free, high environmental protection; 3. Simple bonding process; 4. The product itself is solid, which is convenient for storage and transportation; 5. Compared with Good bonding strength and toughness; Sixth, a wide range of applications.

Features

• DTF powder is specially used for DTF printing. Our powder has excellent adhesion, excellent washability, and can accurately adhere to ink rather than film.

• This powder can be cured at 150C or 300F and pressed for 10-20 seconds. Press the completed transfer again for 10 seconds, and put a piece of parchment paper on it to get a better feel.

• This powder can be cured in an oven using a hot air gun or under a hot press.

• Process to using the powder:
  1. Place the transfer paper on a hot-pressed pillow or hot-pressed foam.
  2. Lower the top heating plate until it is about 1 cm away from the transfer.
  3. Solidify the powder at 160C for about 2 minutes or until melted. At first it will become sparkling. Then it will melt and form a flat surface.

Application: