Anyone Need The Meltblown Fabric For Your Face Mask Produce?



Melt Blown Face Mask Filter Material is a type of high efficiency particulate air filter. This 100% virgin polypropylene filtration material can be used for personal protective equipment masks and respirators. This material has been tested to block 95% of airborne particles with an average particle size range of 3.0 ± 0.3 microns also known as micrometers.


Melt blown fabric is a conventional fabrication method of micro and nanofibers where a polymer melt is extruded through small nozzles surrounded by high speed blowing gas. The randomly deposited fibers form a nonwoven sheet product applicable for filtration, sorbents, apparels and drug delivery systems.


This face mask filtration material is rated at ASTM Level 1 (see documents). The American Society for Testing and Materials (ASTM) is an international standards organization that develops and publishes voluntary consensus technical standards for a wide variety of materials and products. A Level 1 rating is for Low Fluid Resistance. When this filter material is used as the inner layer of a face mask made from a recommended mask material, such as Spun Bonded Polypropylene Non-Woven Material for Masks, the effectiveness of the mask increases.


Use this material as the filter layer inside a DIY face mask or face respirator. Please note this material is single use only and non-washable. We have different gram meltblown fabric, if you have any needs pls feel free to contact us!