Five Factors that Affect the Life of A Dye Sublimation Printer

Nowadays, how to make our dye sublimation printer use longer and bring more profits is a problem that all users are very concerned about. The nozzle has the highest frequency of use and is also a vulnerable component. Obviously, extending the service life of the nozzle is one of the means to reduce the cost. Today, we are going to share 5 points to resolve this problem.
dye sublimation printer One: Indoor Environment
If the working environment of the digital inkjet printer is not too good, the dust can easily enter the main ink cartridge and then the secondary ink cartridge, thereby entering the nozzle, affecting the printing effect of the nozzle and shortening the service life of the nozzle.
Two: Operation
The nozzle part of the nozzle surface cannot be rubbed against any object, and the fine hair is easy to hang on the nozzle surface. Causes plugging and dripping ink, which affects the printing effect. Therefore, strict licensing requires the operation of digital sublimation printer is also very important.
Three: Auxiliary Accessories
Every accessory on the dye sublimation printer has its purpose and should not be removed at will. Like main cartridge, sub cartridge, filter, etc.
Four: Ink
The quality of the ink directly affects the quality of the screen and the nozzle. It is best to use the inks recommended by the printer manufacturer, as these inks are subjected to rigorous, long-term testing and have a certain guarantee for the equipment.
digital inkjet printer Five: Maintenance
The large format sublimation printer must be cleaned before the power is turned off, and the nozzle should be placed on the moisturizing sea surface mat, which can ensure the same picture quality as the previous days. After stopping the machine, be sure to apply cleaning liquid on the surface of the nozzle, and wrap it with plastic wrap. The cling film and the nozzle of the leaf nozzle are tightly attached, thus reducing the evaporation of the cleaning liquid and the ink, and prolonging the service life of the nozzle to a certain extent.
If you do not use the printer for a long time, it is best to remove the nozzle from the device, soak it with the cleaning solution, and wrap the container with plastic wrap to prevent dust intrusion and volatilization of the cleaning solution.
Today's article is here. Any question, please contact us. Thank you for your reading.