Technical DIGISTAR Kiian HI-PRO Transfer Sublimation Ink

Series of transfer sublimation printing inks, compatible with next generation piezo printheads. Developed for printing onto light and/or low coated papers.
kiian ink
DIRECTIONS
It is recommended to let the product reach operative conditions in terms of temperature and humidity at least 24 hours prior to use, taking care of not stirring it, and apply the product under controlled conditions:
• RECOMMENDED TEMPERATURE RANGE: 20-25°C
• RECOMMENDED HUMIDITY RANGE: 40-60%
 
 
The Kiian sublimation ink is ready to use and it is recommended to use it through the external feeding system (INK FEEDER, CODE M4087..), so
that a steady printing quality is assured.
The printed paper must be transferred hot, through calender or flat press, at a temperature between 180-220°C during a
varying time, between 180” and 30’’.
Time and temperature may vary, depending on the type and nature of the material, which the transfer is made onto.
dye sublimation ink
STORAGE
It is recommended to keep the product away from light and heat sources at a temperature lower than 25° C.
 
IMPORTANT NOTE
The information given in this technical sheet is not intended to be exhaustive and any person, using the product for any purpose other than that specifically recommended in this sheet without first obtaining written confirmation from us to the suitability of the product for the intended purpose, does so at his own risk.
dye sublimation ink
While we endeavour to ensure that all advice we give about the product is correct, we have no control over either the quality or condition of the substrate or the many factors affecting the use and application of the product.
Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage arising out of the use of the product.
 
The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.
kiian ink